Prusa CORE One+ Gen.2 INDX Swing Arm Cable Brackets instead of the inelegant Velcros
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Prusa CORE One+ Gen.2 INDX Schwingarm Kabel Halterungen anstelle der uneleganten Klettverschlüsse
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prusa CORE One+ Gen.2 INDX Swing Arm Cable Brackets instead of the inelegant Velcro fasteners.
If you don't like the cable management with Velcro fasteners on the swingarm, here is a more elegant solution using printable brackets (cable clamps).
Standard configuration consisting of the middle bracket and the end bracket with an impact protection extension.
Two-material configuration consisting of the central mount and the end mount, featuring a TPU extension for impact protection (which also serves to reduce noise).
Printing recommendation:
Standard: Filament PETG, 0.4 Nozzle, 0.20 mm Balanced, 100% Infill, no supports
Two-material: Filament PETG and TPU95A for the extension of the End bracket.
Mounting instructions: (see picture below)
