Head Tracking Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a case for the Arduino Nano Sense board. Most commonly used for FPV head Tracking.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designed this case for the Arduino Nano to use with head tracking in FPV. It has the cutout for motion sensing. This case also fits the non sensing board. There are 2 options. The sensing board does not need the button on the side for reset, you just wave your hand in front of it. The NON sensing motion board, use the case with the button hole on the side to place a physical button for tracker reset.
Most of the guide can be follows from Painless360 found here:
DIY Head Tracker Documentation: https://headtracker.gitbook.io/head-tracker-v2.4
DIY Head Tracking Software (Use V2.4) https://github.com/headtracker/HeadTracker/releases
Here are the parts needed to make the head tracker:
Arduino Nano 33 BLE Sense: https://a.co/d/0dA9kAuy
Reset button for NON Sense version: https://a.co/d/08OnwCuC
3.5mm Earphone Audio Jack: https://a.co/d/0iwXZCTg
USB Power Cable: https://a.co/d/0awWHPfT
3.5mm Male Mono Audio Cable: https://a.co/d/08uYkzsT