1 / 2
3D Scanning Marker: Captured Magnet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upsized magnet to 3/8" x 3/16". Captured in print.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a stronger magnet for this that also would not come out. Set a pause on your machine right before the layer that will cover the hole. I placed a small bit of superglue in the hole before inserting the magnet. Make sure to let it dry somewhat if using a hardened steel nozzle! I had a couple rip the entire part off the bed.
PETG
.6 Nozzle
.3 layer height
Magnet Used:
3/8 x 3/16 Inch Neodymium Rare Earth Disc Magnet N52 d63-n52 | K&J Magnetics
Neodymium Magnet, Magnetized Through Thickness, 3/16" Thick, 3/8" OD | McMaster-Carr