Vitalli CNC Liver Idler Y Endstop Bumper(s)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Y end-stop depressor for Vitalli CNC Liver Idlers for Voron V2.4 printers.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Recently installed Vitalli3D's CNC live idlers on my V2.4 during its Stealthchanger conversion and needed a simple/small y end-stop depressor since the new parts sat just below the y end-stop mounted to the top of my CNC motor mounts.
Kept as low profile as possible to not interfere with anything else in the printer. Biggest concern being toolhead board mounts/covers.
Uses the hardware that comes with the live idlers, no need to change screws for a longer screw, the part is only 1mm thick at the mating faces. Do not drastically over tighten as it can blow of the layers at the bottom of the part.
Original solidworks design file, STEP and STL provided.
Thank you for your interest in my model(s) and page!