PB Swiss Tools PB470 M Adapter Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A grippy sleeve for the PB Swiss Tools PB470 M 5mm hex to C6 bit adapter.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 47
- Makes
- 1
- Views
- 789
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a grippy sleeve for the PB Swiss Tools PB470 M 5mm hex to C6 bit adapter. It allows you to use the adapter as a finger bit holder to finger-tighten things that are hard to reach or just need a lot of finger control. All while still being able to use it with a 5mm allen key.
The sleeve is friction-fit and sits very tightly. I had to use a hammer. The bore diameter is 10.2mm and the adapter is 10mm wide.
I printed it in PLA with 100% infill. Might also be interesting to use a medium to low flexible TPE filament.
You may tweak it to your printer's tolerances in Onshape. Just change the bore_diameter variable.