C-Clamp 50mm – Adjustable Clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and adjustable 3D printable C-clamp with 50 mm clearance, designed for easy printing in PETG
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a simple and functional C-shaped clamp designed for 3D printing. The clamp uses a threaded adjustment screw with a large hand knob, allowing the clamping force to be adjusted manually without additional tools.
The design is suitable for various workshop, DIY, electronics, maker and home projects where a compact adjustable clamp is useful.
The clamp body is designed to be printed flat in the C orientation, which provides good strength and makes printing easier.
Main dimensions
Clearance between upper and lower sections: 50 mm
Upper mounting hole spacing: 56 mm
Screw height: 55 mm
Pressure pad thickness: 8.3 mm
Recommended print settings
Material: PETG – recommended
Infill: 15%
Wall loops: 5
Print orientation: Print the main C-shaped body flat, in the C orientation
Layer height: 0.2 mm recommended
Using 5 wall loops is recommended to give the clamp body additional strength, especially around the screw and mounting areas.
The screw, knob and pressure pad are printed separately and assembled after printing.
Note: The actual strength of the clamp depends on the filament, print settings, layer orientation and printer calibration. PETG is recommended for better mechanical durability than PLA.