1 / 2
Parametric M.2 NVMe Heatsink Clip (Fusion 360 Remix) — image 1
1 / 2

Parametric M.2 NVMe Heatsink Clip (Fusion 360 Remix)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parametric M.2 NVMe heatsink clip that replaces the silicone rings. Fully adjustable in Fusion 360 for any heatsink size

Rating
0 / 5
Likes
3
Downloads
2
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

This is a parametric remix of [Original-Titel] by [@_751759]. All credit for the original idea and design goes to them. Please check out and support the original: original

What's different in this remix

I rebuilt the clip from scratch in Fusion 360 as a fully parametric model, so you can adapt it to your own heatsink without redrawing anything. Just open Modify → Change Parameters and adjust the user parameters:

Parameter

Default

Description

innen_breite

22.2 mm

Inner width (fits standard 22 mm M.2 drives)

innen_hoehe

5.95 mm

Inner height from top bar to hook

wand

1.6 mm

Leg thickness

wand_oben

= wand

Top bar thickness

haken_ueberstand

1.671 mm

Hook overhang

haken_hoehe

2.4 mm

Hook height

haken_schraege

1.0 mm

Hook chamfer offset

r_aussen / r_innen

–

Outer/inner corner radius (inner follows outer automatically)

kerbe_tiefe

0.32 mm

Depth of the center notch

The Fusion 360 file (.f3d) is included, as well as a ready-to-print STL with the default values.

About the clip (from the original)

This clip replaces the silicone ring on M.2 NVMe heatsinks. The silicone rings tend to harden and break over time due to heat. The default dimensions are designed for slim 3 mm heatsinks, which are common in SFF systems. For thicker heatsinks, simply adjust innen_hoehe.

Material

  • ABS or ASA: recommended

  • PETG: probably fine

  • PLA: not recommended. It deforms under load at around 40 °C and won't hold up to NVMe SSD temperatures.

Print tips

  • Print lying flat (profile side down) so the layers run along the clip. This makes it much stronger when snapping it on.

  • No supports needed.

Tags