Case for the Framework Laptop 12 Mainboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small case (retro-like for the Framework 12 motherboard) This uses a Waveshare screen (Link Down Below)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is for the screen
Print/assembly notes:
Base is big — 239×317mm (bottom) — needs a large-format printer (300mm+ bed). Screen bezel is 230×157mm, fits most 250mm+ beds.
Hinge is a printed knuckle joint — push a 4mm rod (steel rod, brass rod, or even a long M4 bolt with the head cut off) through once both halves are printed.
Base top/bottom join with the same 6× M3 self-tapping screws as before; screen bezel + back cover use 4 more.
Board install order: mainboard/battery into the base bottom → screw on base top → screen board into the bezel pocket → screw on the back cover → hinge the bezel to the base top → HDMI/USB cable from an expansion card up through the hinge cable notch.