MagSafe Telefonständer / MagSafe Phone Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eleganter, stabiler Smartphone-Schreibtischständer im modernen Waben-Design
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Share Alike
Eleganter, stabiler Smartphone-Schreibtischständer im modernen Waben-Design mit integrierter Aufnahme für das Apple MagSafe Ladegerät und verdeckter Kabelführung.
Beschreibung
Dieser Smartphone-Ständer vereint modernes Design mit hoher Funktionalität für deinen Schreibtisch oder Nachttisch. Das offene Hexagon-/Wabenmuster sieht nicht nur edel aus, sondern spart Material, sorgt für eine optimale Belüftung (passive Kühlung beim Laden) und hält das Gesamtgewicht gering.
Highlights & Features:
Passgenaue MagSafe-Aufnahme: Der originale Apple MagSafe Lade-Puck sitzt bündig und sicher in der Halterung.
Integriertes Kabelmanagement: Auf der Rückseite verläuft eine Aussparung/Führung, um das Ladekabel sauber nach hinten unten wegzuführen.
Sicherer Halt: Die vordere Haltekante sichert das Gerät zusätzlich ab – damit kann der Ständer auch für Smartphones oder Hüllen ohne MagSafe problemlos genutzt werden.
Ergonomischer Blickwinkel: Ideal für Video-Calls, FaceTime, Benachrichtigungen oder den Standby-Modus von iOS.
Druckeinstellungen (Print Settings)
Das Modell wird am besten auf die Seite gelegt gedruckt (siehe Slicer-Bild), um eine optimale Stabilität entlang der Schichtlinien zu gewährleisten.
Drucker: z. B. Prusa CORE One / MK4 / Mini
Ausrichtung: Auf die Seite gelegt
Schichthöhe: 0,15 mm (Balanced) oder 0,20 mm
Infill: 15 %
Perimeter: 2–3
Stützstrukturen (Supports): Ja, organische Stützen (Tree Supports) empfohlen – gezielt an der Unterseite der Smartphone-Ablagekante und am oberen Bogen (am besten per Aufmal-Stützen / Support Enforcer).
Material: PLA oder PETG
Filamentverbrauch: ca. 49 g (~16,5 m)
Druckzeit: ca. 4 Stunden
Maße (B x T x H): ca. 60 x 89 x 137 mm
Modern, lightweight smartphone desk stand featuring a honeycomb design, integrated Apple MagSafe mount, and clean rear cable routing.
Description
A clean and functional desk stand designed to elevate your workspace or nightstand. The geometric hexagon/honeycomb lattice not only creates a sleek modern aesthetic, but also saves filament, speeds up print times, and provides passive heat dissipation while wirelessly charging.
Key Features:
Snug MagSafe Fit: Perfectly sized to hold the original Apple MagSafe charging puck securely.
Hidden Cable Routing: Dedicated channel on the back to route the cable neatly downwards.
Dual Functionality: Front bottom lip holds your phone securely even without magnetic charging or with non-MagSafe cases.
Optimal Angle: Great viewing angle for notifications, FaceTime calls, or iOS StandBy mode.
Print Settings
Print the model lying on its side for best layer adhesion and strength across the legs.
Printer: Prusa CORE One / MK4 / Mini or similar FDM printer
Orientation: On its side
Layer Height: 0.15 mm (Balanced) or 0.20 mm
Infill: 15%
Perimeters: 2–3
Supports: Organic / Tree supports recommended (use paint-on support enforcers under the front resting lip and inner arch).
Material: PLA or PETG
Filament Weight: ~49 g (~16.5 m)
Print Time: approx. 4 hours
Dimensions: approx. 60 x 89 x 137 mm