Protractor 180° (R70)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Half-circle protractor, radius 70 mm: a tick every 1°, numbers every 10° in both directions and a centre hole.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Half-circle protractor, radius 70 mm: a tick every 1°, numbers every 10° in both directions and a centre hole.
140 × 78 × 2.4 mm
Inner and outer scales (0-180 and 180-0)
Ø1.5 centre hole
How it was checked
Checked with an overhang audit of the mesh and sliced in Bambu Studio: no supports needed.
Print settings
A1 mini, 0.20 mm, PLA, no supports: 31 min, 15 g.
Parametric OpenSCAD source included: change the values at the top of the file.
About this design
Designed in code and checked before release (see above); sliced in Bambu Studio. Pictures are 3D renders, not photos. This is a new design: makes and feedback are very welcome.
Español
Transportador de 180° y radio 70 mm. Sin soportes: 31 min, 15 g.
العربية
منقلة ١٨٠ درجة.