Counting matching models…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a protractor model designed to be easy and quick to produce, for printing a 180 degree protractor design to using the eufyMake E1 UV printer. Please see the eufyMake project to print the protractor on the top of the…
Need a pause to add the M3 nut into the knob model. I didn't measure what line this pause needs to be at. The void is large enough that I just watched it, and put the nut in when it had enough clearance. There's more room than there needs…
The detachable ribs are expected to be removed after printing. * Printed in PLA * No brim * No generated support
A set of files in both metric and imperial consisting of various lengths of ruler, protractor and set squares The 45cm (18 inch) and 1m (39 inch) rulers are cut to allow printing on average size beds The OpenScad file allows you to make…
Original model of a stereotaxic rig protractor extension for juvenile songbird surgery. This extension, perfect for veterinarian working on passerines, fits perfectly the standard ear bar of a stereotaxic rig and increase the precision of…
1x5x1.5 Gridfinity Holder for 6" digital protractor, opening is 180mm x 36.767mm. Print is designed to be paused on last few layers to change to a contrasting color for outline and label.
A unique 3D printable creation — this Turntable Cartridge Alignment Protractor Gauge, Overhang Adjustment, Setup Tool Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
If using openGrid, print 2x of the openConnect snaps. (Doesn't have to be the ones included, any of the openConnect snaps should work) If using DDD Wall Control, print 4 of the pins and 1 of everything else. The iFJF protractor is a…
This model use the Skadis universal peg standard by KimJanosch You will need x1 universal peg found here Yes, the model is made to be friction heavy on the peg, design with low friction on the peg have a tendancy to unclip if the tool…
This is a protractor model designed to be easy and quick to produce, for printing a 180 degree protractor design to using the eufyMake E1 UV printer. Please see the eufyMake project to print the protractor on the top of the design direct…
Need a pause to add the M3 nut into the knob model. I didn't measure what line this pause needs to be at. The void is large enough that I just watched it, and put the nut in when it had enough clearance. There's more room than there needs…
protractor holder for the Ikea Skadis system. Works with 1-2 protractor. Print it upside down with support at the arms
Short blades for the Wixey WR41 digital protractor. Uses the original fasteners, simply uninstall the factory plastic rules and install these in their place. Makes for a very compact and handy direct angle measuring solution. I printed…
Transparent 180 degree 0 to 15 centimetre Type: Protractor Size: 150 x 92 x 1.50mm
This is a holder for Ikea Skadis pegboards to hold a digital angle finder, aka. protractor. You slide in the tool from the top right, so you need some place on the board right to this piece. I printed it with 0.3mm layer height without…
A support to hold a protractor inside of a tool cabinet or on a tool wall
I made a Protractor, It can draw circles 、angles and measuring angle.(It is rotatable) Special Tips: When it's finished printing,it might be a little tight. let it takes a few more turns. This model was printed using PLA. (fill in…
EPS1-z³d electronic Protractor holder for Skadis will hold your measuring tools such as protractors securely 4mm slot
This miter saw protractor is specifically designed to ensure a correct and precise miter angle with no effort. The miter protractor could provide you the exact angle you need (inside or outside corners) to make your perfect trim for crown…
Se hizo una regla donde el diseño permite tener un compas y un transportador en la misma herramienta, de un lado estará el transportador y del otro la regla, mientras que el compas es con la ayuda de los hoyos que están en el centro. El…
EASY QUICK TRANSPORTER TO MAKE A QUICKLY MEASURMENT IN YOUR PROJECTS
This protractor has a Vernier scale on the pointer, which lets you read angles with 0.1° precision. Whether you can print and assemble it that accurately is a different matter. I put effort into the gcode to get the seams in good spots…
Print this protractor in clear filament to use it properly, or use my version with a hole in the center.
This is a version of my Protractor. It has a hole to print in normal, solid colors.
Remix of the Tactile Triangle Teaching Tool that adds protractors to each corner. https://youtu.be/V-NWiNNeDmI Example Lessons and Demonstrations Types of triangles Angle/side relationships Triangle congruency Customization Sizes Small -…
I printed it using .12mm layers, with transparent PLA. Added a pause before the first text layer, to switch to black filament.
This “Geodreieck” is a common tool used in school K-12 and they are getting so expensive so that I just started 3D printing them. The result is a dual-color triangle with important markings being highlighted. HOW TO PRINT Download the…
Protractor made with all printed parts, no supports. The numbers and graduations are raised, ideal for 2 colour prints. I did mine by performing a colour change for the last two layers. I found similar models both here and on Thingiverse,…
Lexivon Aluminum Miter Saw Protractor/ Lexivon Miter Gauge (https://www.amazon.ca/LEXIVON-Protractor-Featuring-Precision-LX-230/) Measures 2 x 5 units and is 3 units tall.
A tool used to measure angles from 0 to 90 degrees vertically thanks to gravity. You can check if the table or devices (power tools) or other machines are leveled correctly. What is needed for assembly? screw with washer and nut M3 - 8mm…
Place the flat base of the protractor against the front of the robot and aim the pointer where you want to go. Read the required heading in the pointer window and enter as input in the Myblock. (use a ruler and set your wheel…
If you design parts for 3D printing yourself, sooner or later you will have to measure angles. And sometimes the parts are designed in such a way that it is difficult to position the measuring device. For such cases, I have designed this…
Numbers were floating in original, I moved them down slightly to be able to print the numbers
A simple protractor for nylock mod with 2mm allen wrench in solidarity with the needle.
Simplified indicators for the inner part of the bevel protractor. Easier on the eyes to have a single indicator at 0.
Description This is a Gridfinity bin for the Empire Level Protractor . Designed to be stackable and modular , fitting seamlessly within a 5x2x3 Gridfinity footprint . Features M15 Center Threaded Hole – Compatible with Gridfinity Refined…
I needed a way to measure the angle of some inside walls to see how far off of 90 degrees they were. This will measure angles between about 65-115 degrees and is pretty easy to read. The pieces should snap-fit together with a fairly tight…
A simple but great design to have handy for the classroom- a simple color swap can give you contrasting colors for the base and numbers for better visibility. Filament colors used in photo- Panchroma Translucent Grey PLA and Polylite PRO…
Just print out 2 mains rivet them together and the tube size you have 100% infill. 38, 40, 45 and 50mm or 1-1/2, 1-5/8, 1-3/4, and 2" Press them in on the dashed line for your central line radius your bending die has 4", 4½", 5", 5½",6",…
/// Requires Hardware /// What?: A simple protractor, made a lot sturdier by splitting it into two halves. Features: Numbers for your angle every 15 degrees Ruler that goes up to 14 cm The bottom has an indentation to help find the center…
Fits most angel finder level box that is 59x59mm it will stop so you can put in 2st 20mm washers max 2mm wide and ad a m6 locking nut in the hole and a m6 threaded bar and a nut and you can index your tubes all day.
Printing Settings: Print at above 15% infill Supports are not required
I made this for my protractor which is about 6 inches in diameter no supports needed nice and easy to print holes are designed for standard drywall screws (8mm down to 4mm) both designs assume your protractor is 0.9in wide Category: 3D…
Transparent 180 degree 0 to 9cm protractor Type: Protractor Size: 150 x 92 x 1.50mm
This holder is designed for 1” (25mm) pegboards and works with Sy’s Peglock mounting system to securely hold a digital angle finder (protractor). I’ve tested it with the Empire digital angle finder, and it fits perfectly. This is my first…
This is based on the “Corner Protractor” model by nightfox90 , but heavily modified. I added a larger, finer, multi-color scale and snap-fit connectors so that it does not fall apart. Also, you can now measure more extreme obtuse and…
Jednoduchý držák na úhloměr Parkside Parkside simple protractor holder
Have you ever felt cramped while typing on an ortholinear keyboard? Was your monoblock ergo perfect in one position and terrible in all others? Are you tired of hauling two separate halves with your fully split keyboard? Well, I may have…
This tool wall holder is designed specifically for the Shinwa No.19 Protractor, providing secure, upright storage on your workshop tool wall. The fit holds the protractor firmly in place, protecting it from scratches and keeping it easily…
Three Rulers with handles. 15cm ruler 25cm Ruler 15cm Ruler with Protractor - (draw lines every five degrees.) The rulers in the render below are a Two Colour Print using 3 filament changes. Start Filament - White First swap at Layer 8 to…
PARKSIDE protractor or caliper support for IKEA SKADIS and HSW Honeycomb Storage Wall - rapporteur d'angles angles. Please like it. Used with : https://www.printables.com/model/920068-kyz-hsw-display-stand-medium?lang=fr
3D-printed protractors have a pretty low resolution for the scale lines. Therefore I created one to laser cut with engraved scale markings. I've included two different versions, one with a half circle and one with a quarter circle scale.…
Angle Finder Protractor Angle Indicator Block The beveled block counter offers a flexible and reliable way to measure and verify angles, making it essential for numerous practical uses. Printed using PETG or PLA with 15% infill.
I made this protractor to have a better understanding of which angle my Hwayeh MG90S micro servo points in with regard to the applied PWM signal from the microcontroller. The servo I have is quite similar to a standard 9G servo, but not…
Ikea Skadis container for digital protractor Category: Tools
Every cutout is 10 degrees, one file has the protractor cutouts all the way and cutouts every 1 inch. Rings are 4.25-4.33 inches apart.
The detachable ribs are expected to be removed after printing. * Printed in PLA * No brim * No generated support
A set of files in both metric and imperial consisting of various lengths of ruler, protractor and set squares The 45cm (18 inch) and 1m (39 inch) rulers are cut to allow printing on average size beds The OpenScad file allows you to make…
Have you ever forgot your protractor to class, well you can stop that now with this simple print. (btw the one in the photos is the small one) What you may need: - 3D printer (lol) - Filament - Keychain ring Reccccccomended: - Ironing…
UPDATE 9/18/25: Fixed the incorrect circle number (3/16 → 3/8). So sorry for the inaccuracy! The print photo is now outdated but only for the circle measurement. Also removed the 3MF files because they were generated by Fusion 360 and…
A Gridfinity bin for a protractorA Gridfinity bin for a protractor
Introducing the ultimate Drawing and Measuring set, perfect for students and professionals alike. It includes a ruler, a set square and a protractor, which has the essential trigonometry formulas written upon it. Note that, when measuring…
Summary A simple & practical protractor & compass providing a full 360° of use. Useful for measuring or drawing circles, arcs & lengths in ½ centimeter increments. It's size & ruggedness makes it Ideal for woodworking or metal work. The…
Bring precision and style to your desk or workshop! This clean and minimalist 3D printed geometry set includes: 📏 Straight Ruler – perfect for measuring and drawing clean lines 🟰 Triangle Ruler (Set Square) – ideal for technical drawings…
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
I built my wall the other way around and I was too lazy to start again, as a lazy maker I adapted. small angle protractor hook
Original model of a stereotaxic rig protractor extension for juvenile songbird surgery. This extension, perfect for veterinarian working on passerines, fits perfectly the standard ear bar of a stereotaxic rig and increase the precision of…
Am besten aus PLA drucken. Zusätzlich benötigtes Material: 1 Sechskantschraube M4x10 1 Sechskantmutter (am Besten Selbstsichernd) M4 Bei den GCodes sind Farbwechsel eingefügt, um die Skala besser ablesen zu können: “Bogen”: 0,8mm…
This is a tool nholder for Starrett 505P-7 Mitre Protractor. Use it with 2x0 Flat Brackets from the DDD system to mount on your board. Insert the pin pieces between the sides and the tool holder. I also included files for the brackets…
1x5x1.5 Gridfinity Holder for 6" digital protractor, opening is 180mm x 36.767mm. Print is designed to be paused on last few layers to change to a contrasting color for outline and label.
To cut a long story short: tol-protractor-drawing-assembled-height-04.stl is most likely what you need. The rest is written for advanced users. This model is for drawing. There is also The SMALLEST Protractor for CAD modelling . I found…
A unique 3D printable creation — this Turntable Cartridge Alignment Protractor Gauge, Overhang Adjustment, Setup Tool Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print…
If using openGrid, print 2x of the openConnect snaps. (Doesn't have to be the ones included, any of the openConnect snaps should work) If using DDD Wall Control, print 4 of the pins and 1 of everything else. The iFJF protractor is a…
This model use the Skadis universal peg standard by KimJanosch You will need x1 universal peg found here Yes, the model is made to be friction heavy on the peg, design with low friction on the peg have a tendancy to unclip if the tool…
I made a coarse clay protractor for pottery use for my partner. It is divided into twelfths, with the major ticks are quarters and eights, the minor ticks are thirds and sixths. I included imperial sizes 3 to 6 inches, which can be…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
protractor holder for the Ikea Skadis system. Works with 1-2 protractor. Print it upside down with support at the arms
Short blades for the Wixey WR41 digital protractor. Uses the original fasteners, simply uninstall the factory plastic rules and install these in their place. Makes for a very compact and handy direct angle measuring solution. I printed…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
fillament: petg printer: prusa mk4s I used 0.10mm detail for the shaft and c-clips, but 0.20mm detail for the protractor and arm. It seemed to work fine. 15% infill The tolerences are a bit tight, so you may have to adjust. The part of…
This has been my most useful model I've made so I wanted to share it. I always have my keys on me and here I have a quick reference for small measurements. Is this a ¼ inch bolt? Should I make the shim 3mm or 10mm? It has come in handy…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
This is 2D Openscad which generates SVG images of a protractor or compass. In Geometry, the zero angle starts on the positive X axis and progresses counter clockwise. In Navigation the zero angle starts at North and progresses clockwise.…
I just installed the Nylock bed leveling mod on my MK3S and wanted to take the guesswork out of turning the bed screws in accordance with directions from the Prusa Leveling Guide in Octoprint. Each mark on the protractor is 5 degrees, and…
Bookmark, template, ruler, and protractor. I made this for my physics students to recognize excellent work. Besides, "Don't Panic" is great advice for physics students (Thank you, Douglas Adams). Includes Dimensions: 100mm x 50 mm (4in x…
box for digital protractor / digital Winkelmesser Aufbewahrung material: 3DJAKE TPU A95 Orange nozzle: 0.6 / layerheight: 0.3 / infill: 100% printed with support, removing was surprisingly easy lid and base slide together perfectly and…
Here's a display/holder for Ikea Skadis Pegboard. I also tried to make a pleasant design which does not scream to be utility only. Enjoy :)
Imprimé en PRUSAMENT PLA - 0.4/0.2 Imprimé en PRUSAMENT PLA - 0.25/0.15 Printed in PRUSAMENT PLA - 0.4/0.2 Printed in PRUSAMENT PLA - 0.25/0.15 Matériel nécessaire 1x Vis M4x8 1x écrou M4 Necessary material 1x M4x8 screw 1x M4 nut Conseil…
Goniometro per falegnameria, inserire le viti come da fotografia e stringere i dadi. Riempimento 20%, layer 0,2, materiale PETG o PLA. Protractor for carpentry, insert the screws as shown in the photograph and tighten the nuts. 20%…
![[PythonSCAD] Vernier bevel protractor with simplified indicators](https://media.printables.com/media/prints/1164590/images/8773593_7a6f09dc-3a57-439a-b953-9e1c4ab40ac8_2f110c75-6368-4bba-811c-7e080de4c8d9/capture.png)
