Winkelmesser; Protractor
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.10 – €0.12 net (excluding VAT)
For file: Mutter_0.15mm_PLA_MINI_8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.11 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 7.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Einfacher Winkelmesser mit 1 Grad Skala, feststellbar Simpe half-circle protractor with 1 degree scale, lockable
- Rating
- 4.923 / 5
- Likes
- 139
- Downloads
- 1,826
- Makes
- 31
- Views
- 5,951
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Am besten aus PLA drucken.
Zusätzlich benötigtes Material:
1 Sechskantschraube M4x10
1 Sechskantmutter (am Besten Selbstsichernd) M4
Bei den GCodes sind Farbwechsel eingefügt, um die Skala besser ablesen zu können:
“Bogen”: 0,8mm
“Zeiger”: 1,8mm
bei 0,2mm Schichtdicke
“Mutter”: Druckpause bei 5,6mm um die Mutter einzulegen
Schichtdicke: 0,15mm
Best results by using PLA
Additional Material:
1 Hex screw M4x10
1 Hex nut (preferably self-locking) M4
Added colorchanges at the GCodes, for more contrast at the scale
“Bogen”: 0,8mm
“Zeiger”: 1,8mm
at .2mm layer
“Mutter”: pause print at 5,6mm for insert of the nut
at .15mm layers