1 / 2
10 cm protractor with mm function (Accurate)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lightweight easy to print protractor with mm function (Accurate) - .gcode also included
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 109
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
There are very few measuring tools online without mm function for some reason, so I made my own.
Marks are 0.5 mm high with a 1 mm. Flexible, but robust
Note: Black markings are drawn on with permanent marker for simplicity. I do not recommend pausing the print to change filaments to mark the numbers and notches in a different colour as testing has resulted in all sorts of issues.
- Weight: 2.92 g
- Time to print: 30 m
- Layer Height: 0.2 mm (no need to print 0.1 mm)
- Infill: 100%
- Brim: No
- Filament: PLA+ Silk. However, any filament could be used.