Hexapod Thigh Bottom Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make the leg assembly simpler and more robust
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 13
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v2.0
This is a remix of Hexapod v2.1 by smallptsai.
This remix makes the leg assembly simpler and more robust by moving the leg screws from the side to the top. This makes the legs much easier to assemble and disassemble, and avoids the fragile side screw points from the original design.
The remix includes three parts: a redesigned thigh_bottom, a reused body_top provided as body_bottom and a bottom_plate to cover the large hole in the reused body part.
The redesigned thigh_bottom does need a small amount of print support, but overall this improves the build experience and makes the hexapod easier to maintain.
Required Printed Parts
Print the parts from the original model as usual, with the following change:
Print the redesigned thigh_bottom from this remix
Print body_bottom.stl from this remix instead of the original body_bottom
Print bottom_plate.stl from this remix
Print the remaining original hexapod parts as needed
Included Files
thigh_bottom.stl - redesigned replacement for the original thigh bottom, with top-access screws
body_bottom.stl - the original body_top reused as the bottom body section
bottom_plate.stl - required bottom plate for this remix
ESP32 Firmware, Simulator and Web App
I also made a separate ESP32-based control project for this hexapod:
https://github.com/runeharlyk/Hexapod
It includes firmware for the robot, a simulator and a web app for controlling and testing the hexapod.