Universal Tripod Leg Spreader Collar / Spider Replacement (18.9mm / 16.1mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printable replacement leg spreader collar / spider joint for standard camera tripods with an 18.9mm main tube. Desi
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Public Domain
Description:
Replacement Tripod Leg Spreader Hub / Collar
This is a 3D printable replacement part for the central leg spreader joint (collar/hub) on light-to-medium-duty camera and lighting tripods. Over time, the original plastic brackets often crack or snap under pressure. This model restores full functionality to your tripod without having to buy a new one.
Dimensions & Compatibility:
Center Main Tube Outer Diameter (OD): ~18.9 mm (designed for ~19 mm tubes)
Leg Spreader Bar Width: ~16.1 mm
Hardware Needed: M3 / M4 bolts and nuts or small rivets (depending on your tripod's original assembly)
Note: Please double-check your tripod's tube dimensions with a caliper before printing to ensure a snug fit!
Print Settings Recommendation:
Supports: None / No supports needed (designed for easy printing)
Material: PETG, ABS, or ASA (recommended for higher layer adhesion and outdoor durability; PLA may work as a quick fix)
Infill: 40% – 100% (Gyroid or Grid for maximum structural strength)
Wall Loops / Perimeter: At least 4–5 walls for strong screw/nut holding points
Layer Height: 0.20 mm