1 / 9
Void-Core: Brutalist Framework 12 Enclosure — image 1
1 / 9

Void-Core: Brutalist Framework 12 Enclosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

With the Void-Core you can hide your PC in plain sight!

Rating
0 / 5
Likes
5
Downloads
3
Makes
0
Views
197
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Void-Core is a minimalist, brutalist-inspired desktop enclosure designed for the Framework 12 mainboard. Breaking away from standard flat-box PC cases, this design treats negative space as its primary feature, utilizing a massive central void and a "floating" roof panel.

The Design Supports:

  • 4x Expansion cards (secured in place with easy switching)

  • Wifi antennas, either:

    • Antenna with U.FL connector (e.g. the original FW antenna) attached to the top side of the Mainboard_holder with double sides tape. You print the normal VC_bottom_left and VC_bottom_right files.

    • U.FL to bulkhead (RP-)SMA adapters (example) (special VC_bottom_left_SMA and VC_bottom_right_SMA parts are needed with hole for the SMA connector), and (RP-)SMA antennas

  • Adequate cooling through the openings of the Mainboard_cover_middle part, and heat removal through the Heatguard part

  • Heat protection with heat-resistant filament around the hot parts, and less demanding filaments for the aesthetics

  • Weight carrying possibility: place a lightweight item on top, let it be your favorite minifigure or a Lego Groot, your imagination is the only limit (it does NOT support the weight of a monitor)

  • Each part is printable on printers with at least 250 x 250 mm built plate size

Printing Guidelines:

  • Ideally you would use 3 filaments:

    • 2x beautiful ones without heat tolerance requirements

    • 1x a heat tolerant one

  • Print the following parts in heat tolerant material (at least PETG):

    • Mainboard_holder_left

    • Mainboard_holder_right

    • 2x Exp_card_clip

    • Mainboard_cover_middle

    • Heatguard

  • Print the following parts in one beautiful color:

    • 4x Feet

    • 4x Pin

  • Print the rest with the second beutful color

  • Also, do what you want with the colors, who am I to tell you what to do?

  • Most parts print without supports

  • You might consider supports under the bolt-holes (when the bolt head is facing down)

  • Print the VC_bottom and VC_top parts with their as-built bottom sides on the buildplate. The VC_bottom parts require support at the back.

Assembly Hardware:

  • Framework 12 Mainboard (any generation)

  • 4x FW Expansion card of your choice

  • Wifi antenna of your choice

  • 17x M2x6 hexagon socket head cap bolts (DIN 912), preferably stainless steel

  • Superglue

Assembly Instructions:

  1. Assemble the hovering top from VC_top_left and VC_top_right with 2 bolts.

  2. Assemble the Void-Core from VC_bottom_left and VC_bottom_right with 3 bolts.

  3. Flip the Void-core upside down and attach the 4 feet with 4 screws. Be careful with how much force you exert on the model, the back part of the Void-Core is fragile at this stage.

  4. Lay the back side of the Void-Core on the table at the edge of the table, with the front part reaching under the table. This orientation gives a lot of support to the back and you can exert more force on it like this.

  5. Assemle the mainboard holder from Mainboard_holder_left and Mainboard_holder_right. They snap together without the need of a bolt.

  6. Add the two Exp_card_clips to the two sides of the mainboard holder with 2 bolts.

  7. Superglue the mainboard holder into the back of the Void-Core. Make sure that the mating surfaces touch each other everywhere during the drying the glue.

  8. Mount the FW Laptop 12 mainboard to the mainboard holder with its captive screws.

  9. Mount your antenna of your choice. The empty place above the Expansion cards is a prime position to do so. You might want to hide the cabling under the mainboard.

  10. Add 4 Expansion cards of your choice. This is also a grand opportunity to try the locking and unlocking of the Expansion cards. The card lock themselves upon insertion, and you need to gently raise the Exp_card_clip to be able to remove the cards. If you are blessed with bigger hands, you can use a small screwdriver or similar to raise the clip. Still, be gentle.

  11. Mount Mainboard_cover_middle to the mainboard holder with 4 bolts.

  12. Mount Mainboard_cover_left and Mainboard_cover_right to the mainboard holder with 2 bolts. In the future if you need to switch the Expansion cards, you need to remove the respective left or right cover.

  13. Make the Void-core stand on its feet. 

  14. Superglue the Heatguard to the respective cutout on the hovering top.

  15. Insert the 4 Pins into the hovering top. The Pins are held in place by friction.

  16. Gently, insert the other side of the Pins to the Void-Core. Make sure not to exert too much force on the back side of the Void-Core, and support the back side with your hands when inserting the Pins. The Pins are held in place by friction.

  17. Ta-daaa, enjoy your Void-Core!

  18. Optional: when your grandma comes over, make sure to put some white lace tablecloth on the top. Or if you lack one, print one from Kepler49 and melt it to shape like I did!

Backlog:

  • Currently all big parts are cut in half to fit to normal sized buildplates. Uncut parts to be made available for those with big printers.

Tags