Gothic Shelf (≈12.5" x 4" x 4") [No supports or glue needed]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a simple gothic shelf that can be put together without glue and can print without supports. 12.5" long 4" thick 4" tall
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 14
- Makes
- 1
- Views
- 107
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
disclaimer: the gothic designs came from google and i am not the original creator of those designs themselves. i did design the whole shelf itself.
anyway, its a 2 piece gothic décor shelf that can be printed on the same bed without supports and does not require any glue to stay together. once the dovetails are pressed in, it stays together fairly well. but for extra measure there is a mounting hole through both parts that keeps them together indefinitely. can be mounted using some standard smaller size flat head screws. each piece can be printed in the orientation provided and each is about 6.25 inches tall give or take.
I printed it in PETG @ 245c on .3 draft (smaller would be better for overhangs though. but takes significantly longer to print something like .2 or .18 profile would be better). no supports. 15% infill. vertical shell: 6 horizontal shell: 6 (not required) you could print with 2-4 walls with just as good results. print time was about 22 hours. came out great though.
i would love to see some likes, comments, makes, maybe some constructive feedback. thanks for checking it out!