Lupine C14 Mag Dockingstation for Ikea Skadis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dockingstation for the Lupine C14 Mag Light. Please read Printing Instructions!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Lupine C14 Mag Docking Station for IKEA SKÅDIS
This docking station is designed to hold a Lupine C14 Mag on an IKEA SKÅDIS pegboard and makes charging the light quick and convenient.
The original Lupine charging cable can be routed along the back of the holder and secured with cable ties. Once installed, the magnetic charging connector stays in position inside the dock, so charging is as simple as placing the C14 Mag into the holder.
If you just want to store the light without charging it, simply insert it rotated by 180°. This keeps it securely stored while preventing the charging contacts from connecting.
The holder attaches directly to the SKÅDIS board using integrated hooks, so no additional mounting hardware is required.
Important printing note:
The part should be printed lying on the side surface as shown in the additional print-orientation image. This gives the SKÅDIS hooks the correct layer orientation and helps prevent them from breaking during installation or use.
The charging cable is held in place with standard cable ties, making installation simple and allowing the cable to be replaced or removed if needed.