1 / 3
SKÅDIS holder for TP-Link Omada POE380S PoE++ injector — image 1
1 / 3

SKÅDIS holder for TP-Link Omada POE380S PoE++ injector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Portrait pocket for the TP-Link Omada POE380S (90 W PoE++) injector on IKEA SKÅDIS. Plugs exit straight out underneath.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

A pocket that holds the TP-Link Omada POE380S PoE++ injector (155 x 70 x 42 mm) upright on SKÅDIS. The injector drops in from the open top and sits on a floor frame that is open in the middle, so the leads on the bottom end come straight out. A spring tab keeps it snug and the logo faces out.

This was the first part of my rack and the test bed for the hook design, so it uses its own hook bars (included). Print the pocket upside down (open top on the bed): no supports, just one 70 mm bridge. skadis_fit_check.scad is the fit test I used for the hooks.

Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.

Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts

Other parts in my SKÅDIS network rack:

Tags