SKÅDIS holder for TP-Link Omada POE380S PoE++ injector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Portrait pocket for the TP-Link Omada POE380S (90 W PoE++) injector on IKEA SKÅDIS. Plugs exit straight out underneath.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pocket that holds the TP-Link Omada POE380S PoE++ injector (155 x 70 x 42 mm) upright on SKÅDIS. The injector drops in from the open top and sits on a floor frame that is open in the middle, so the leads on the bottom end come straight out. A spring tab keeps it snug and the logo faces out.
This was the first part of my rack and the test bed for the hook design, so it uses its own hook bars (included). Print the pocket upside down (open top on the bed): no supports, just one 70 mm bridge. skadis_fit_check.scad is the fit test I used for the hooks.
Print settings: PETG, 0.2 mm layers, 4 walls, 25% gyroid, no supports.
Editable OpenSCAD source: https://github.com/PrimroseHA/skadis-network-mounts
Other parts in my SKÅDIS network rack:
Hook bars (start here): https://www.printables.com/model/1866142
TP-Link TL-SG1024D 24-port switch: https://www.printables.com/model/1866147
Heatmiser neoHub v2: https://www.printables.com/model/1866148
Samsung SmartThings Hub v3: https://www.printables.com/model/1866154
Lightwave Link Plus L2: https://www.printables.com/model/1866155
TRIGKEY G4 mini PC: https://www.printables.com/model/1866149
2 x UGREEN 2.5" SSD enclosures: https://www.printables.com/model/1866157
Sonoff ZBDongle-E Zigbee dongle: https://www.printables.com/model/1866160
Wall spacers and caps: https://www.printables.com/model/1866187