Slim Scraper Handle for Plastic Blades
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim, low height, scraper handle for plastic blades, that better gets under objects and brims.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 1
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
A very low profile scraper handle, which allows for holding the blade closer to the bed and reduces the possibility of prints and brims to catch on the scraper handle.
The design was made with the intent of allowing the handle to be printed on the side, without requiring supports. The purpose of printing it on the side is to ensure layer lines are alligned for better strength in the blade jaws. The added benefit is that you get a perfect area for holding your thumb for better handling. The downside is of course there's a right- and a lefthanded version. The righthanded version is just a mirror of the lefthanded version that I designed. This should printed using PETG for more strength and flex in the jaws and it should be printed on the side.
I've also uploaded the FreeCAD design file, where you can quickly change the Handle Length and the Handle Width. The length is from the thumb rest to the butt of the handle.
The blade is just there for reference, not one that should actually be used. I don't think it would be very robust.
Print instructions
Setting | Value |
|---|---|
Material | PETG |
Layer Height | 0.2 mm |
Wall Loops | 4+ |
Orientation | Slim side of handle, opposite thumb reset |