Replacement Handle for 2" Ball Valve – 8 × 16 mm Cross Socket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement handle for a 2" ball valve with an 8 × 16 mm cross-shaped socket. Includes reusable socket STL.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 4
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a replacement handle for a 2" ball valve using a cross-shaped stem connection approximately 8 mm wide × 16 mm long.
The handle was designed as a replacement for a broken or missing original part.
The cross-shaped socket has been tested in practice and fits very well on the valve stem.
The complete handle has also been printed, installed, and used successfully for over two years without problems.
Because ball valves from different manufacturers may use different stem geometries, please check the shape and dimensions of your valve before printing.
The critical interface dimensions are:
8 mm – width of each branch of the cross
16 mm – overall length of the cross
Included files
Replacement handle STL – the complete printable handle
8 × 16 mm cross socket STL – a separate reusable socket/interface model
The socket STL is not required to print the handle.
I included it because the fit works very well and it may be useful as a starting point for other projects that use the same cross-shaped stem connection.
It can be reused to design other handles, adapters, knobs, or custom mechanisms around the same interface.
Printing recommendations
For a functional part, I recommend:
PETG
ASA
ABS
another tough engineering filament
Use a good number of walls/perimeters and solid enough infill, especially around the socket area where the torque is transmitted.
PLA may also work depending on the application, but a tougher material is preferable for long-term mechanical use.
Important note
This model was designed for a specific valve with this stem geometry.
A 2" ball valve does not guarantee the same socket shape, so always verify the stem dimensions before printing.