Narex VYS 33-21 L Shop Vacuum – Base Connector for Tool Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base connector that replaces the nozzle normally fitted to the Narex VYS 33-21 L hose; base for my tool adapters.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Replacement for the nozzle that normally goes on the hose of the Narex VYS 33-21 L shop vacuum. It is the base geometry the individual tool adapters in this set were modelled from.
It is not perfectly precise – it may need small tweaks to fit your hose. Size: Ø49.5 × 31 mm. Part of my set of dust extraction adapters that connect my (mostly Makita) power tools to a Narex VYS 33-21 L shop vacuum – see the collection Makita dust extraction adapters – Narex.
Printing
- Material: typically ASA or PETG; for parts under more load PCTG, or glass-filled ASA (ASA-GF).
- Fusion 360 source (
.f3d) is included, so you can adapt it to your own needs.
Notes
I designed, printed and use this myself, but I don't have photos of the printed part yet – I may add them later.
Provided as is, without any warranty. Check the fit for your own tool/setup before relying on it.
License
I'm sharing what I made – do whatever you like with it (remix, modify, sell prints), just credit me. (CC BY 4.0)