59 models
Holder for set of electrician scewdrivers (i created it for set of local brand Narex, but i believe it will fit many others). Holder for smaller screwdrivers has holding conus - top diameter is 15.5mm, bottom diameter is 11.7mm Holder for…
This is a pegboard holder for the standard Narex chisel set .
This is a holder for the standard Narex chisel set ( 8630-10 + 8631-10)
I was looking for a solution to store my chisels in the tool box drawer. I have just started getting into 3D printing and came across the Gridfinity platform. I couldn't find anything to suit my needs to I went ahead and designed this.…
One rack pair holds a set of three Marples chisels, the second rack pair holds a set of four Narex chisels. See the video here: https://youtu.be/ztdbiVzUNpE
Here are 13 different size chisel caps to protect the sharp end from damage. I printed mine in TPU. They may fit other chisels, but the taper and thickness may be different. You can scale them in in a slicer program to get different fits.…
1x5 Gridfinity holder for Narex Marking Knife. It may fit others but I have a Narex.
I saw these unhandled chisels on a YouTube channel that I follow (StumpyNubs): https://taytools.com/collections/brands-narex-chisels/products/narex-6-piece-unhandled-bevel-edge-set I picked up a set as a fun multi-media project. The…
Narex Wooden Screwdriver Mount - Wall or Skadis Peg Board - 7 Piece This is my original design for the Narex 7-piece wooden screwdriver set, available here . Wall Mount Details: 4mm holes for 6G screws. 9mm wide channel for screw bit. Two…
I designed this wall holder for my Narex Richter chisels by measuring and modeling the chisels themselves and then subtracting them from a holder body. They model the taper and don't rest on the leather they sit entirely on the metal with…
Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…
Remix of the existing Narex chisel mount, but for mounting to the wall instead of a peg board.
Makita Makpac base models: https://www.printables.com/cs/model/375395-makita-makpac-systainers-organisers-for-drill-bits
Narex Hybro holder for Honeycomb storage wall
Cap for Narex marking knife to protect the blade and your fingers. Fits Narex Marking knife with finger indents , 1.2mm thickness (code 822352). PETG, 0.2mm layers, no supports F3D file is included.
This simple bracket holds the chisel by the ferrule at the base of the handle, with the beveled top edge catching the handle where it begins to flare out. This should prevent any plastic corners from contacting the chisel and causing…
remix of original model for pegboard with keyhole pattern
Box pro 15 bitů a šroubovák - v1 pouze stejná hloubka pro bit. Ve verzi v2 v horním patru větší hloubka pro prodloužené bity. Print instructions vrstva 0,2
Popis Jednoduché příslušenství k modelářskému hoblíku Narex 44x102mm. Informace k tisku Na tisku není nic speciálního, doporučuji vrstvu 0.2 pro oboje, případně variabilní výšku vrstvy pro knoflík. Knoflík má pro jednoduchost tištěný…
První verze krabičky pro šroubovák NAREX HYBRO a jedním nástavcem. Později verze pro šroubovák s více nástavci a upraveným zavíráním.
Holder for attaching the NAREX Hybro Evo cordless screwdriver to the IEKA Skadis pegboard. Remix of original model by @6d6178 . Print instructions: I decided to use PETG. Supports required, I recommend organic. See the attached 3MF file…
Chisel rack to hold Narex Chisel set 863010 (6 mm, 12 mm, 20 mm, 26 mm). Bevel at bottom of slots is enough that the tip of the chisel will not rest on any of the rack.
Cap for Narex spoon carving knife to protect the blade and your fingers. Fits Narex Carving knife for spoon making, double-edge . (And yes, I use it for cleaning up prints instead of woodworking.) PETG, 0.2mm layers, no supports F3D file…
Do not forget to use supports for inner parts.
Držák je navržen pro původní verzi Narex Hybro (nevím rozměry nové) takže šestiúhelník má průměr 47,3 mm (rovnoběžné stěny proti sobě mají rozteč 41 mm). Rozměr držáku je 200 x 120 mm a na výšku 65 mm.
I created this friction fit Narex chisel holder for the wall control unit. All pieces to print are in one file. This is friction fit, so put the mallet in and press down and it should lock into place nicely.
Replacement rubber foot for Narex JC-032 ladder. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 40% Filament: Devil design TPU Black Category: Replacement Parts
A simple model of a box for a woodworking drawing knife. The proble is to maintain shrpenes of the knife a woodworking shop. The is the reason why I designed a simple box with a title. The title is in Czech but can be easily modified to…
Model lze vytisknout z PLA filamentu je jednoduchý bez podpěr, vyplněnní vystačí 15% mřížka model není nijak mechanicky namáhán. K tisku jsem použil základní nastavení Prusaslicer pro PLA Prusament.
Vacuum cleaner adapter for old saw NAREX EPK16.
Gridfinity folder for Narex Richter Chisel, 1/2". Added cutouts for easier retrieval which are not shown in the cover photo. Please see the model. Step file available upon request.
podstavec pro aku šroubovák d skříně s nářadím
This is reduction for drill Narex and Protool. Suitable for stand from antother century :) Narex SU2. Much more better than metalic two original reductions. You can use very simple openscad code for your needs.
Added size number, fillet, internal relief, and profile to hold. Rhino file attached. Please share if you make another size. Please be carefull with your sharp objects.
Original authors Narex chisel model with Multibuild/Multiboard pegs instead of HSW mount.
This holds a single chisel, of any size up to 1-1/2". Print one per chisel, and they tile neatly (the edges aren't rounded/chamfered so that they look more seamless when side by side. This is really only about a v0.9, not quite a full…
Based on sketch posted by Jonathan on The Bench Blog. Narex #1 Phillips and slotted screwdriver shanks available from Northwest Passage Tools. Suggest printing the ferrule in vase mode. It should be a press fit and only require a couple…
Náhradní díl pro Narex EBU 13, pravdědobně by fungovalo i na podobných, ale nic neslibuji.
Print with 0.4mm nozzle, 0.2mm speed (or whatever profile your printer does), PLA and default settings (my printer is a Prusa XL 5T) Designed for Narex files and rasps with the handle ferrule at the bottom being 19mm at the bottom of the…
EN: Designed for Narex Aku-screwdriver ASV 10-2A, but may fit other cases. CZ: Navrženo pro Narex Aku-šroubovák ASV 10-2A, ale možná bude pasovat i do jiných kufříků.
Holder for NAREX bit screwdriver, It Is T-screwdriver, use Double-sided adhesive tape
Díl se skládá ze dvou částí. Dovnitř nutno umístit šroub M5
Raspberry shaped cap for 874610 Narex Scratch Awl - Conical works with PETG better with TPU Enjoy Please be careful with sharp objects
Redukce na vysavač pro přímočarou pilu Narex EPK16D
Please print this from flexible filament like TPU. It is recommended to print Outer perimeters first. No supports needed. Ussage is shown on image.
Graphic on the bottom of the print was not made using 3D printer. Grafika zespod modelu není součástí modelu 3D tisku.
Small case for the ladies (pink version) of the Narex Habro electric screwdriver. In the upper layers of both parts, holes are made for inserting magnets: two holes in each part (see picture) for two magnets 28x9 mm (so 8 magnets in…
Holder for narex micro line screw driver on ikea skadis.
Sada pro úchyt svítilny Narex FL 1400 Flexi na člun. Díly je nutno tisknout v naznačené orientaci. Varianta A pro použití s RAM Tough-Claw, ze kterého se odšroubuje kulová spojka a přišroubuje vytištěný díl za použití originálního šroubu.…
Edit 2026-10-29 (2): added a flat 1 mm TPU gasket for the lid flange (part 6), it goes between the flange and the barrel lid. Added a tighter variant of the lid flange (part 4b) – the original one slid almost all the way up the outlet…
Replacement for the vacuum's own hose end. It connects a 50 mm flexible hose , so that the individual tools – original Narex parts as well as the printed adapters in this set – can be attached to it. Size: Ø54.7 × 95 mm. Part of my set of…
Replacement for the nozzle that normally goes on the hose of the Narex VYS 33-21 L shop vacuum. It is the base geometry the individual tool adapters in this set were modelled from. It is not perfectly precise – it may need small tweaks to…
Dust extraction adapter for an Evolution mitre saw. Honest note: it is not ideal – the hose puts quite a lot of load on the saw's own dust-port holder when the saw head moves. Size: Ø49.5 × 66 mm. Part of my set of dust extraction…
Connector that goes into the inlet of the Narex VYS 33-21 L shop vacuum and takes a 50 mm flexible hose – the hose screws into its internal thread . Size: Ø65 × 94 mm. Part of my set of dust extraction adapters that connect my (mostly…
Introduction The Peggit system is a simple way to attach holders and organizers to your pegboard using simple automotive rivets. The clip easily attaches to standard pegboard with 1" spacing using 15mm x 12mm x 6mm automotive push rivets.…
Graphic on the bottom of the print was not made using 3D printer. Grafika zespod modelu není součástí modelu 3D tisku.
