Funwheel X7 Treez Tri Force Stompies Grip tape with lightbar cutout
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grip tape for the X7 Vesc Onewheel for Fungineers stompies footpads with a cutout for the light bar
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
First off just wanna give props to the OG creator for making such a great grip tape file you will need to use the original file i remixed to print the grip tape for the tail of your board. The file name for that is stompies polytg tri force v1. your going to want to print the base in 95a tpu and the spikes in 72d tpu. In case the G-code included with the file doesn't work or load this is the process. After the 5th layer finishes printing you are going to want to pause the print so you can quickly swap out the 95a tpu for the 72d tpu as well as adjust the hotend temperature to 235 degrees celcius. And then hit resume and your on the home stretch.