Counting matching models…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon https://www.patreon.com/c/Adamnant - where you can ask me…
onShape CAD version of Fungineers X7 rails done from scratch. All credits to Rick, who did a great job. Uploading with his permission X10 rails coming soon!!
Oklahoma Fungi character toy! I did not personally make this model but it is a paid and commissioned design from a 2d company logo! Can be scaled up or down, and requires support to be turned on. I use Cura tree supports and for…
Print fenders in ABS or PETG with 100% infill. Foot hooks, AirTag cover, and mud flap should be printed in TPU. Mount the foot hooks to the fender using M5 screws and nuts. Nuts should slot into the cutouts on the back of the fenders.
Completely redesigned cable cover to protect cables and controller itself from mud, water and dust . Alligned with the top of the rails, so does not interfere with any fenders, Flight Fins holders etc. https://ridefoundry.com/
onShape CAD version of Fungineers X10 rails done from scratch. All credits to Rick, who did a great job. Uploading with his permission
Mini fender, mud guard, and DTF base piece, all in one! For X7 rail angles with 11in tire, Fits both the raised and lowered rail positions. Larger tires or offset (raised AND lowered position) may require modification to the riser. This…
Shroomy is a fungal wizard I made as a practice. I plan to print him soon, so I can post a make.
Step model and bolt pattern for fitment check and getting measurements Designed by fajdiga2001 <discord username
Fungineers Stompies front footpad for modeling reference, provided to me by Fungineers. Thank you, Fungineers!
This is an adapter plate to allow installing FlightFins XR/VESC Fender with a Fungineer Stompies Footpad Created because the Stompies Footpad was a different profile than I expected, and had a 3d printer to fix that. Uploading here since…
Updated CAD below. A adapter to allow the Fungineers stompies and X7 rails to mount a regular TFL drop top fender and lowers too. Print 2. 1 for the rear and 1 for the front. Use countersunk 4x M5x12mm and 4x countersunk M5x20mm for…
I liked the original version very much, but it seemed that they didn't fit over my motor bolts which have very large heads. I didn't have the .step file so I modded the .stl in tinkercad. Worked great for me.
Official Thor400 VESC controller model assembled. Model is not owned by me.
Print it flat. Works for low/high rails position (just rotate it) Nozzle : 0.4/0.6 Filament : TPU
Here are a few Myconid models. These are fun little characters or potential NPCs. Models in this collection: myconid_adult1 - Simple stem headed version w/ clothing myconid_fighter1 - Insect-like face with bulbs on the top of the mushroom…
The front and rear fenders are the same, and the rear mud flap is unchanged from the original. The front mudflap is cut away to make room for the bend in the X7 rails. If mounted on X10, flat or other rails, you can use the rear mudflap…
A remix on a community uploaded cable cover for fungineers based controller boxes in the VESCify discord
Funwheel Controller Lid Fungineers Onewheel XR You can laser cut or CNC in polycarbonate
Includes a ready-to-print 3MF file which contains front and rear pubgrip ready to print. Also contains some DXF files with outlines, if you'd like to use those together with…
Mini fender, mud guard, and DTF base piece, all in one! For X10 rail angles with BTG tire. Fits both the raised and lowered rail positions with the TFL Thundercat BTG tire. Larger tires or offset (raised AND lowered position) may require…
Note: I'm working on an update to this design that splits the handle into 3 parts to make it more sturdy and adds an 85mm aluminum spacer into the clamp to strengthen the clamp's top half. I recently took a high-speed tumble on my board…
My own version of Superflux hub Fungineers
Print fenders in ABS or PETG, Mud guards best printed in TPU. Use your own judgement for infil. This will only work on rails with same footpad angle and distance as X7. Really probably only the X7. Definitely won't work on X10 Tested this…
Updated CAD below. An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the…
onShape CAD version of Fungineers Superflux new mounts done from scratch. All credits to Rick, who did a great job. Uploading with his permission
A close out is required when using the Fungineers Stompies footpads on a standard Onewheel XR. This closeout is compatible with standard rails and fenders. There's also a variant that includes an LED status light holder. Details on how to…
Superflux motor for modeling reference, provided to me by Fungineers. Thank you, Fungineers!
Modified the rear to match a front (stock) stompy. The exception being wire channel distance, which has been repositioned to allow the use of exile or nexus sensors. I print in PETG, 75% infill, and print the lense in clear PETG, 100%…
Same mission as my AtlowTorque box holders. These sit perfectly in the void between the rail, battery box, and bang bumper to hold the nylock in place. STEP uploaded for ez mods. I HIGHLY recommend that you print hot and overextrude for…
A adapter to allow the Fungineers stompies and X7 rails to mount a regular TFL drop top fender and lowers too. Print 2. 1 for the rear and 1 for the front. Use countersunk 4x M5x12mm and 4x countersunk M5x20mm for securing to the X10…
Updated CAD below. A fender delete designed for Fungineers x7 boards using stompies. Curved because life's too edgy these days. Use 4x countersunk M5x14mm and 4x countersunk M5x10mm for securing to the X10 rails. 10mm for the inner bolts…
why does the acorn like to hangout with the mushroom? because he's a fungi. this is a super simple print that can add a splash of colour to your garden or plant pots. PLA Glow will be needed for the mushroom tops if you want them to glow.
JF H4 is very bright but also very hot. This heat sink help transferring heat to Fungineer front box. Aluminum is recommended and the 2 holes need to be M3 tapped (see PDF drawing). When installing use a thin thermal pad to allow heat…
Updated CAD below. A fender delete designed for Fungineers X7 boards using stompies. Use 4x countersunk M5x14mm and 4x countersunk M5x18mm for securing to the X7 rails. 18mm for the inner bolts towards the wheel well and 14mm for the…
An extended lower designed to allow a TFL drop top fender (XR(C)/GT) to fit on an X10 rail system with Stompie footpads. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the inner bolts towards…
A fender delete designed for Fungineers x7 boards using stompies. Curved because life's too edgy these days. Use 4x countersunk M5x14mm and 4x countersunk M5x10mm for securing to the X10 rails. 10mm for the inner bolts towards the wheel…
This will fit a fungineer battery box that included the 20s2p battery bought together. When I opened my battery box to check the BMS screws and loctite them I noticed the BMS was dusty after only 80 miles of riding. The provided red…
Updated CAD below. A fender delete designed for Fungineers X10 boards using stompies. Use countersunk 4x M5x14mm and 4x countersunk M5x18mm for securing to the X10 rails. 18mm for the inner bolts towards the wheel well and 14mm for the…
Custom art on a drink coaster. Nice.
A fender delete designed for Fungineers X7 boards using stompies. Use 4x countersunk M5x14mm and 4x countersunk M5x18mm for securing to the X7 rails. 18mm for the inner bolts towards the wheel well and 14mm for the bolts that go through…
1mm and 1.5mm gaskets for your lid
Meet Fungi Fred the first in my paint a gnome series of figures! My partner made him and others out of ceramic a few years back, so I want to preserve their magic, while learning more about my Creality Ferret pro! Ideal for: Garden decor…
IMPORTANT: You will only receive the bifungi; the other 3 models marked with a red X are part of this set but are not included in this product. This product will only allow you to download one of the 4 mushrooms, the bifungi. The license…
A friction fit cover plate for the axle bolt holes on the Fungineers Funwheel Thunder rails. Three models included for the three different ride heights on these rails. Choose the High model when using the lowest holes Choose the Mid model…
mud guard for X10 X7 funginners batterybox onewheel
A fender delete designed for Fungineers X10 boards using stompies. Use countersunk 8x M5x16mm for securing to the X10 rails.
LED spacer - holds down the LED inside of the black box, and also prevents misc. cables from being able to move around. Fuse cover - Designed for TheBoardGarage's fuse block. It isolates the fuse from contacting anything else, locks both…
A adapter/spacer part that makes these fender deletes compatible w/ the different sized parts on the Long Range model of the X7 Vesc based boards made by the fungineers. The X7LR is a fairly new model and the fungineers had to change the…
It is custom made for my TPU griptape, but will work on regular grip tape or if you flatten your TPU knobs. I designed this to not interfere with the foot sensor. I printed in ASA flat side down. This works with the hardware, print…
I printed in solid PC, but any strong heat resistant material would probably work. i used some random screws i had laying around that threaded in well to the plastic. Maybe someone else would use this idk
Protects cables and plugs from dirt and splashes. Print in petg or tpu. Also works with my splash/mud guard system.
Mud and splash guards, inducing cable guards for the newer fungineers powertrain with mini fenders. Print in TPU for the mud guards. Cable cover PETG or hard TPU, for the fenders something like PETG is ok, but you do you...
My version of the Front Fungi Stompies Fender Delete. for some reason the other versions didn't really fit my board so i made my own
NOTE: If you download this on your iPhone you can’t view the html correctly unless opening it in Safari or another browser. ALSO, this comes in one color and not painted as rendered in the thumbnail.
I wanted a way to make set up easier for this game, that also supported sleeved cards and vertical storage. The STL contains both card boxes, print it once. My print in the photos is hashed as I print without tops/bottoms/walls to save on…
I am creating a casual sci-fi series called Fungirl set in an alternate Earth called Earth 82 in the year 3011. Ava is the protagonist in my series and the first 3D printable character I created. I am setting the price as open as I wish.…
Protect those nice rails. I personally like to print face down. I do that and use the angled front and rear versions to minimize catching on objects. If you print face up, you will want the flat ones. The front and rear will fit the x7…
Glue the lightbar to it. I printed it in PETG: 3 sidewalls, 3 top layers, 3 bottom layers and 10%infill. should be ready in less then 10min
not sure which version of mushies - originaly made by VOW Systems
The front and rear fenders are the same, and the rear mud flap is unchanged from the original. The front mudflap is cut away to make room for the bend in the X7 rails. If mounted on X10, flat or other rails, you can use the rear mudflap…
Print fenders in ABS or PETG, Mud guards best printed in TPU. Use your own judgement for infil. This will only work on rails with same footpad angle and distance as X7. Really probably only the X7. Definitely won't work on X10 Tested this…
Same mission as my AtlowTorque box holders. These sit perfectly in the void between the rail, battery box, and bang bumper to hold the nylock in place. STEP uploaded for ez mods. I HIGHLY recommend that you print hot and overextrude for…
Mini fender, mud guard, and DTF base piece, all in one! For X10 rail angles with BTG tire. Fits both the raised and lowered rail positions with the TFL Thundercat BTG tire. Larger tires or offset (raised AND lowered position) may require…
Mini fender, mud guard, and DTF base piece, all in one! For X7 rail angles with 11in tire, Fits both the raised and lowered rail positions. Larger tires or offset (raised AND lowered position) may require modification to the riser. This…
I printed in solid PC, but any strong heat resistant material would probably work. i used some random screws i had laying around that threaded in well to the plastic. Maybe someone else would use this idk
A remix on a community uploaded cable cover for fungineers based controller boxes in the VESCify discord
My version of the Front Fungi Stompies Fender Delete. for some reason the other versions didn't really fit my board so i made my own
Funwheel Controller Lid Fungineers Onewheel XR You can laser cut or CNC in polycarbonate
