Inverter Bypass Fan Duct for Old Military Generators
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intended to bypass the inverter previously used by the US Military. This houses 4 rectifiers and a 120mm fan.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A friend purchased a retired 3kW 60Hz generator from a military auction. I don't have the NSN but can update this upload later if necessary.
It did not come with an inverter. He is a rather decent electrical wizard, so he formulated the idea of using 4 rectifiers (in whatever manner is supposed to make sense, I can not help with that or that part number used)I am a mechanical engineer). So that is what is in the 2nd part of the duct.
For assembly, you will need 1/4-20 rivet-nuts, 1/4-20 x 1" bolts, 1/4" washers, 1/4" lock washers,#10-24 bolts (size depends on thickness of fan), #10-24 nuts, #10-24 washers, & #10-24 lock washers
I included the FreeCAD files as well if you go with a 240mm fan, you can modify it.
As for printing these are the settings I recommend, I have yet to print as I am waiting for him to choose the filament.
Orientation: Match the images (duct is shaded red)
Infill: 40% - Adaptive Cubic (Gyroid if you don't mind the noise it makes)
Perimeter Walls: 8
Brim: On - at least 2mm (5-10 if you just want to be safe)
Supports: On - Organic (my preference, probably fine otherwise) - 35deg Overhang Threshold