Bicycle Wheel Top Crankset Cover Guard 120mm^2 bolt pattern
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cover/guard for my bicycle's Wheel Top crankset that has a 120mm^2 bolt pattern
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My crankset guard broke recently, so I went searching for a reasonable replacement model. I found https://www.printables.com/make/3670725?comment_id=3670725 which is a great model, but unfortunately wasn't a good match for my crankset.
After some investigation I found I had a Wheel Top crankset, with a bolt pattern of 120mm^2. Immediately, I got to modeling. I kept it simple, and made a parametric model so small tweaks could be made for minor adjustments/depths/offsets, etc, but the shape is a relatively simple one. The outer face is a simple flat ring, and the inner face has a bit of a lip to help cover closer to the gears to hopefully protect from gunk a little better.
The screws I bought were M4 x 8mm countersunk screws, but the F3D file is provided in case you'd like to use a different type of bolt or screw.
I'm not confident in my cycling mechanics so I was a bit conservative for my case--but you may be able to exaggerate more to get better protection.