Bicycle Wheel Top Crankset Cover Guard 120mm^2 bolt pattern
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cover/guard for my bicycle's Wheel Top crankset that has a 120mm^2 bolt pattern
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My crankset guard broke recently, so I went searching for a reasonable replacement model. I found https://www.printables.com/make/3670725?comment_id=3670725 which is a great model, but unfortunately wasn't a good match for my crankset.
After some investigation I found I had a Wheel Top crankset, with a bolt pattern of 120mm^2. Immediately, I got to modeling. I kept it simple, and made a parametric model so small tweaks could be made for minor adjustments/depths/offsets, etc, but the shape is a relatively simple one. The outer face is a simple flat ring, and the inner face has a bit of a lip to help cover closer to the gears to hopefully protect from gunk a little better.
The screws I bought were M4 x 8mm countersunk screws, but the F3D file is provided in case you'd like to use a different type of bolt or screw.
I'm not confident in my cycling mechanics so I was a bit conservative for my case--but you may be able to exaggerate more to get better protection.