4040 aluminum extrusion bolted cable guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for Simrig (Racing Simulator) Bolt to use: DIN 912 M6 x 16 Use SUPPORT for bolt holes (supports: everywhere)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Cable mount for 4040 aluminum extrusion, designed for a simrig (racing simulator). Intended for 6 mm cables.
A simple bolt-on mount that fits the 40 x 40 mm footprint of a 4040 profile, so you can route and secure cables along your rig instead of letting them hang loose. It is a compact, flat part (about 40 x 40 mm, roughly 11.5 mm thick) that is easy to print and easy to mount.
Versions
Two versions are included: a slotted version and a flat version. The slotted version is about 11.5 mm thick and the flat version (file name "flat") is about 10 mm thick.
Hardware
Bolt to use: DIN 912 M6 x 16 mm (socket head cap screw). The bolt goes into the T-slot of the 4040 extrusion.
Printing
Use supports for the bolt holes (supports: everywhere).
Print it with the flat face down on the print bed.
Feel free to post a make or leave a comment if you have questions or suggestions.
Need a longer one? See the 160 mm version: https://www.printables.com/model/1880121-4040-aluminum-extrusion-bolted-cable-guide-160mm-v