4040 aluminum extrusion bolted cable guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for Simrig (Racing Simulator) Bolt to use: DIN 912 M6 x 16 Use SUPPORT for bolt holes (supports: everywhere)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 7
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Cable mount for 4040 aluminum extrusion, designed for a simrig (racing simulator). Intended for 6 mm cables.
A simple bolt-on mount that fits the 40 x 40 mm footprint of a 4040 profile, so you can route and secure cables along your rig instead of letting them hang loose. It is a compact, flat part (about 40 x 40 mm, roughly 11.5 mm thick) that is easy to print and easy to mount.
Versions
Two versions are included: a slotted version and a flat version. The slotted version is about 11.5 mm thick and the flat version (file name "flat") is about 10 mm thick.
Hardware
Bolt to use: DIN 912 M6 x 16 mm (socket head cap screw). The bolt goes into the T-slot of the 4040 extrusion.
Printing
Use supports for the bolt holes (supports: everywhere).
Print it with the flat face down on the print bed.
Feel free to post a make or leave a comment if you have questions or suggestions.
Need a longer one? See the 160 mm version: https://www.printables.com/model/1880121-4040-aluminum-extrusion-bolted-cable-guide-160mm-v