4040 aluminum extrusion bolted cable guide 160mm version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
160 mm long version of the 4040 extrusion cable guide, for a simrig. Bolt: DIN 912 M6 x 16.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Cable mount for 4040 aluminum extrusion, designed for a simrig (racing simulator). Intended for 6 mm cables.
This is the 160 mm version: the same design as the original 4040 aluminum extrusion bolted cable guide, but longer (about 40 x 160 mm, roughly 11.5 mm thick).
Hardware
Bolt to use: DIN 912 M6 x 16 mm (socket head cap screw). The bolt goes into the T-slot of the 4040 extrusion.
Printing
Use supports for the bolt holes (supports: everywhere).
Print it with the flat face down on the print bed.
Feel free to post a make or leave a comment if you have questions or suggestions.
Looking for the original, shorter version? See https://www.printables.com/model/1880073-4040-aluminum-extrusion-bolted-cable-guide
