4040 aluminum extrusion bolted cable guide 160mm version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
160 mm long version of the 4040 extrusion cable guide, for a simrig. Bolt: DIN 912 M6 x 16.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Cable mount for 4040 aluminum extrusion, designed for a simrig (racing simulator). Intended for 6 mm cables.
This is the 160 mm version: the same design as the original 4040 aluminum extrusion bolted cable guide, but longer (about 40 x 160 mm, roughly 11.5 mm thick).
Hardware
Bolt to use: DIN 912 M6 x 16 mm (socket head cap screw). The bolt goes into the T-slot of the 4040 extrusion.
Printing
Use supports for the bolt holes (supports: everywhere).
Print it with the flat face down on the print bed.
Feel free to post a make or leave a comment if you have questions or suggestions.
Looking for the original, shorter version? See https://www.printables.com/model/1880073-4040-aluminum-extrusion-bolted-cable-guide
