FixDock Universal — Adjustable Smartphone Repair Holder ( STEP FILE )
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printable adjustable smartphone repair holder with a screw-driven clamping mechanism and protective contact pads.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
FixDock Universal — Adjustable Smartphone Repair Holder
FixDock Universal is a 3D-printable smartphone holding fixture designed to assist with phone repair and electronics maintenance.
Features
Adjustable clamping gap for different smartphone sizes.
Screw-driven adjustment mechanism.
Protective contact pads to help prevent scratches.
Modular design for future modifications and improvements.
Compact form suitable for electronics workbenches.
Intended Applications
Smartphone repair and maintenance.
Supporting devices during screen and battery replacement.
General electronics workshop tasks.
Design
Created in Autodesk Fusion 360 with a focus on practical functionality, mechanical adjustment, and 3D-printable components.
Important Notes
This design is a prototype. Compatibility and mechanical performance have not been established for every phone model. Check all clearances and test the clamping mechanism before use. Do not apply pressure to camera lenses, buttons, or fragile screen areas.
Feedback
Suggestions and improvements are welcome! If you print or modify this design, share your results and help improve future versions.
Material: PLA+ or PETG
Layer height: 0.20 mm
Wall count: 4
Infill: 30%
Supports: As needed