1 / 4
Bauer K14 compressor impeller blade / fan blade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement fan blades
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The 1980's BAUER K14 compressor's original green impeller blades are rapidly deteriorating and can snap off. (In my case, I just butchered them because I forgot to properly fix the cowling…) To replace them (18 pcs) you can print this one in a strong, somewhat heat resistant material with 100% infill and replace them. I used ASA-CF and that seems to work just fine. My design is a bit flawed though: the 4 round bosses are a few tenths too big. Enlarge the holes in the metal flanges to 10mm and the prints will fit just fine and will be a little bit stronger than the originals!