1 / 4
Bauer K14 compressor impeller blade / fan blade — zdjęcie 1
1 / 4

Bauer K14 compressor impeller blade / fan blade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement fan blades

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The 1980's BAUER K14 compressor's original green impeller blades are rapidly deteriorating and can snap off. (In my case, I just butchered them because I forgot to properly fix the cowling…) To replace them (18 pcs) you can print this one in a strong, somewhat heat resistant material with 100% infill and replace them. I used ASA-CF and that seems to work just fine. My design is a bit flawed though: the 4 round bosses are a few tenths too big. Enlarge the holes in the metal flanges to 10mm and the prints will fit just fine and will be a little bit stronger than the originals!

Tagi