1 / 2
Keyboard Feet - Tilt Riser Wedges in 3 Heights, Replace Broken Keyboard Legs, No Supports (OpenSCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wedge risers that tilt a keyboard to a comfier angle or replace snapped flip-out feet: three pairs, 6, 10 and 14 mm.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wedge risers that tilt a keyboard to a comfier typing angle, or raise a keyboard whose own flip-out feet have snapped off. Three pairs in different heights so you can find the angle you like; stick them under the back edge with double-sided tape or sticky pads. Also good for tilting a laptop, a trackpad or a drawing tablet.
DETAILS
• 45 x 22 mm, 6, 10 and 14 mm tall at the back.
• Prints flat with no supports.
• Bambu Studio: 54 min, 24 g for all 6.
CUSTOMIZE (OpenSCAD)
Heights, length and width.