1 / 2
Keyboard Feet - Tilt Riser Wedges in 3 Heights, Replace Broken Keyboard Legs, No Supports (OpenSCAD) — zdjęcie 1
1 / 2

Keyboard Feet - Tilt Riser Wedges in 3 Heights, Replace Broken Keyboard Legs, No Supports (OpenSCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wedge risers that tilt a keyboard to a comfier angle or replace snapped flip-out feet: three pairs, 6, 10 and 14 mm.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
12
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Wedge risers that tilt a keyboard to a comfier typing angle, or raise a keyboard whose own flip-out feet have snapped off. Three pairs in different heights so you can find the angle you like; stick them under the back edge with double-sided tape or sticky pads. Also good for tilting a laptop, a trackpad or a drawing tablet.

DETAILS

• 45 x 22 mm, 6, 10 and 14 mm tall at the back.

• Prints flat with no supports.

• Bambu Studio: 54 min, 24 g for all 6.

CUSTOMIZE (OpenSCAD)

Heights, length and width.

Tagi