Gemini TT-02 Turntable Replacement Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A foot replacement for the Gemini TT-02 turntable. Requires one M6×22 button head screw (ISO 7380) per foot.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
Gemini TT-02 Turntable Replacement Foot (Screw-in)
One of the feet on a friends Gemini TT-02 turntable broke, and since replacement parts are hard to find, I modeled a new one. It’s a direct replacement for the original disc-shaped foot and screws into the existing threaded mount on the bottom of the turntable.
Hardware needed
1× M6×22 button head screw (ISO 7380) per foot
An M6×20 screw works as well and is easier to find in most hardware stores
Self-adhesive felt pad (like the ones used for chair or table legs) for the bottom of the foot
Print recommendations
Material: Printed in PLA, works perfectly fine. PETG should work too if you prefer something more durable.
Infill: 20% was enough for me
No supports needed
Important: add a pad to the bottom
A bare plastic foot transmits vibrations and can scratch your furniture. I stuck self-adhesive felt pads (the kind used under chair or table legs) to the underside, which works great. Rubber or cork pads are a good alternative if you need more grip.
Notes
Feel free to print a full set of four if you want all feet to match. If you test it with other Gemini models, let me know in the comments!