CoralBoard Modular Case System – VESA Mount, 40mm Fan & Ventilated Lids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A few Case/Mounting options for the CoralBoard
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 6
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
INFO
The files include the following options
-A bumper style Base which can be used on it own for desktop testing or with a lid
-VESA mount Base for both 75mm and 100mm mounting options
-A CoralBoard Text-Embossed Slotted Lid
-A slotted Lid for passive cooling
-A 40mm fan lid for Active cooling (should suit any 40mm pc fan, but was tested with a 5v 40mm x 10mm Noctua fan)
Hardware
Use 4x M3x5mm when using just a base
Use 4x M3x15mm when using a base and lid
For a 10mm fan use 4x M3x15mm or for a 20mm fan use 4x M3x25mm screws and 4x nuts to mount the fan, also you can use Pins 2 (+5v) and Pin 4 (-GND) on the 20 Pin GPIO to power the fan
Print Settings
Print the Base Upright and the Lid Upside Down. No supports are required.
I printed at 15% infill, 4 walls, 4 Top/Bottom layers and it came out quite sturdy.
Disclaimer
This is an independently designed, unofficial enclosure compatible with the Synaptics CoralBoard. It is not manufactured, sponsored, or endorsed by Synaptics.
CoralBoard and related trademarks are the property of t