Wall Holder for 2 Hammers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted holder for two hammers.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Standard Digital File License
Wall-mounted holder for two hammers. The handle slides into a V-shaped fork that is 40 mm wide at the front and 24 mm at the back, fitting handles from 22 to 35 mm, while the hammer head rests on top and a small bump stops it sliding forward. Works for machinist, carpenter and framing hammers up to roughly 130 mm head length, with ribs under the forks for strength. Size 228 x 55 x 86 mm, rated 4 kg total. One part, PETG at 0.2 mm without supports. You need two 4 to 5 mm countersunk screws and anchors.
Parts
Uchwyt na mlotki bezbajzlu.stl x 1
Print settings
Bambu Lab A1, 0.4 nozzle, PETG, 0.20 mm layer
No supports needed
Full set: 4 h 57 min, 117 g