1 / 2
Prusa Core One + Gen2 Magnetic Top Cover (Remix for Gen2) — image 1
1 / 2

Prusa Core One + Gen2 Magnetic Top Cover (Remix for Gen2)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic top cover for Prusa Core One + (remixed for Gen2)

Rating
5 / 5
Likes
6
Downloads
12
Makes
1
Views
152
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Remix of https://www.printables.com/model/1226383-prusa-core-one-magnetic-top-cover-with-integrated for Prusa Core One + (Gen2).

The differences are:

  • Removed front handle for sliding the vents, this is done done by internal automatic lever instead.

  • Added more chamfers and fillets for sleeker design and better printability.

  • Added PETG plugs to fill the holes where the Gen2 opening levers were before.

Printing instructions:

  • Print "Frame Complete Set" in PETG. Note it is a multi-plate 3MF. I used orange for the two handles and black for the rest.

    • 0.2mm layer height, structural, 15% infill. 0.4 mm nozzle. No supports needed.

  • Print the extended vent lever in a heat resistant material. I use Prusament PCCF (which is what the original part was also printed in). If you use a different material you may have to compensate for different shrinkage factor.

    • 0.2mm layer height, structural, 15% infill. 0.4 mm nozzle. No supports needed.

  • Print the 4 plugs for the Core 1 + Gen2 levers in PETG or better. Not load bearing so default structural profile works fine.

Hardware needed:

  • Same as the original magnetic top cover:

  • You will reuse the 4 screws for the Gen2 lid levers to mount the new blanking plates

Assembly instructions:

CAD models in Onshape (better than STEP files, if you use OnShape):

Tags