ZipTie Magnetic Cable Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small magnetic zip tie cable mount. Uses 3x8 or 1.5x8 magnets and can fit a wide variety of cable sizes.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
A small printable magnetic zip tie cable mount. Can work with a wide variety of cable sizes. I highly recommend using the 3x8 magnet version, as those magnets can hold a lot more weight and the magnets press-fit nicely into the part. Depending on your printer, you may need to glue the 1.5x8 magnets into their respective version. The 3x8 magnet version can hold a good amount of weight and is suitable for use just about anywhere.
3x8 magnets I used: https://a.co/d/09x5aTeo
Printing:
Tolerances are designed around PETG, so your mileage may vary when using other filaments. Stock PETG profiles should be adequate, but it may be prudent to increase the walls a bit just to make sure everything is secure.