ZipTie Magnetic Cable Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small magnetic zip tie cable mount. Uses 3x8 or 1.5x8 magnets and can fit a wide variety of cable sizes.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
A small printable magnetic zip tie cable mount. Can work with a wide variety of cable sizes. I highly recommend using the 3x8 magnet version, as those magnets can hold a lot more weight and the magnets press-fit nicely into the part. Depending on your printer, you may need to glue the 1.5x8 magnets into their respective version. The 3x8 magnet version can hold a good amount of weight and is suitable for use just about anywhere.
3x8 magnets I used: https://a.co/d/09x5aTeo
Printing:
Tolerances are designed around PETG, so your mileage may vary when using other filaments. Stock PETG profiles should be adequate, but it may be prudent to increase the walls a bit just to make sure everything is secure.