Slowcoach Fidget Sloth for Your Desk
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Belly down fidget sloth with a segmented body, printed in place without supports, in AMS or single colour.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 22
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Standard Digital File License
This fidget sloth prints in place as a single piece, lying belly down with its front arms and back legs stretched out and a segmented body behind its round head. The AMS profile gives it a cream face with black eyes set in terracotta patches and a small black nose. In the single colour profile, the print itself shapes those same features without any colour changes. It's a laid back desk companion for idle hands on a slow afternoon, and it'll happily take up residence on a sloth loving friend's shelf.
No supports means there's nothing to snip away once it's finished printing. Use at least 2 wall lines and keep 0.6mm line widths on the default, initial and outer walls. Sloths are famous for taking life slowly, and this one will happily do the same on a sunny windowsill.
Filament Colour & Material
Use PLA for this one. Terracotta with cream and black copies the AMS look from the photos, or pick a single warm brown for the sculpted single colour version.
Print Settings
Print in place
Supports: No
Wall line count: 2 or more
Infill: 15%
Nozzle: 0.4mm
Layer height: 0.16mm
Line width: 0.6mm for default, initial and outer walls
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: