Slowcoach Fidget Sloth for Your Desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Belly down fidget sloth with a segmented body, printed in place without supports, in AMS or single colour.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
This fidget sloth prints in place as a single piece, lying belly down with its front arms and back legs stretched out and a segmented body behind its round head. The AMS profile gives it a cream face with black eyes set in terracotta patches and a small black nose. In the single colour profile, the print itself shapes those same features without any colour changes. It's a laid back desk companion for idle hands on a slow afternoon, and it'll happily take up residence on a sloth loving friend's shelf.
No supports means there's nothing to snip away once it's finished printing. Use at least 2 wall lines and keep 0.6mm line widths on the default, initial and outer walls. Sloths are famous for taking life slowly, and this one will happily do the same on a sunny windowsill.
Filament Colour & Material
Use PLA for this one. Terracotta with cream and black copies the AMS look from the photos, or pick a single warm brown for the sculpted single colour version.
Print Settings
Print in place
Supports: No
Wall line count: 2 or more
Infill: 15%
Nozzle: 0.4mm
Layer height: 0.16mm
Line width: 0.6mm for default, initial and outer walls
Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon: