Mini Stick-On Door Stopper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stick-on mini door stopper, no drilling, under 6 g of filament.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
A small, low-profile door stopper that sticks to the floor with an adhesive pad or double-sided tape. Its ramp-like shape lets the door slide over it and then holds it gently in place from below. The slightly flexible design catches the door softly instead of stopping it abruptly. No drilling, no screws, just stick it down and you’re done.
Super cheap to print: Each stopper uses less than 6 g of filament, so it costs just a few cents. Print one for every door in the house!
Available versions: 6 mm, 7 mm, 8 mm, 9 mm and 10 mm, matching the gap under your door. Simply measure the gap between the floor and the bottom of your door and pick the matching version.
Print settings
Material: PETG (recommended for its flexibility)
Orientation: on its side (already oriented correctly in the STL files)
No supports needed
Mounting
standard adhesive pad or double-sided mounting tape