MX Front Brake Hose Guide for Honda CRF / XR, BSE Z5 | GA Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A practical 3D-printed front brake hose guide for MX motorcycles. Designed to fit compatible Honda CRF, XR and BSE.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A practical 3D-printed replacement for the front hydraulic brake hose guide on motocross and off-road motorcycles.
This model is designed for compatible Honda CRF, Honda XR and BSE Z5 motorcycles. It guides the front brake hose along its intended path and helps keep it correctly positioned during riding.
The guide was designed as an affordable alternative to the original replacement part, which can be unnecessarily expensive for such a small component.
The model is printed in PETG.
Features
Designed for compatible MX and off-road motorcycles
Fits the specified Honda CRF, Honda XR and BSE Z5 models
Guides and helps retain the front hydraulic brake hose
Practical, lightweight 3D-printed replacement
PETG material recommended
Features the author's GA logo
Easy to manufacture using a standard FDM 3D printer
An economical alternative to purchasing the original hose guide
Compatibility
Designed for the following motorcycle models:
Honda CRF
Honda XR
BSE Z5
The model has been designed to fit the specified compatible models. However, mounting details can vary between model years and versions, so compare the printed part with your original guide before installation.
Recommended print settings
These settings are recommended for a functional replacement part.
Material: PETG – recommended
Layer height: 0.20 mm
Infill: Approximately 25%
Perimeters / wall loops: Increase the wall count as needed so that the narrow sections are formed entirely by perimeters wherever possible
Supports: Check the supplied 3MF orientation and inspect the slicer preview before printing
Printing notes
The wall count is important for this model. Set enough perimeters to ensure that the narrow sections and functional edges are solidly formed by the outer walls, rather than relying on sparse internal infill.
An infill density of approximately 25% is sufficient for the remaining internal areas.
PETG is recommended for its useful combination of toughness and durability in a functional motorcycle accessory.
Installation and safety
Remove the original hose guide, if fitted.
Compare the printed model with the original part and check that all mounting points align correctly.
Install the printed guide and position the brake hose correctly.
Turn the handlebars fully from lock to lock and check that the hose is not stretched, kinked, pinched or rubbing against other components.
Inspect the installation before riding.
Important: The guide must not restrict steering movement or interfere with the front brake hose, brake operation or any other motorcycle component. Inspect the printed part regularly for wear, cracks or damage, especially after off-road riding.
This part guides the brake hose; it is not a replacement for any hydraulic brake component.
Files included
STL: Model geometry for use with your preferred slicer.
3MF: Model file for convenient import and print preparation.
Designed for practical use on compatible MX motorcycles.