1 / 2
Prusa CORE One/+ Articulated Nextruder Cable Chain Exoskeleton link with movable PTFE clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional link with PTFE clip on a joint made it movable
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 66
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
In the original model, PTFE tube was not meant to be clipped to the chain on the first link attached to the swing arm.
My PTFE tube is although fed into the printer from the top and I needed to guide it into the original link path. It resulted in breaking the tube in the clip under the swing arm of the printer, causing the filament stuck.
Solution was to allow the PTFE clip to move/rotate freely.
This link has an added joint for the clip so the tube is allowed to move as the nextruder pushes the swing arm.