Filament Roller for YOOPAI dry storage boxes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament roller to fit the new YOOPAI Pro filament storage boxes found on Amazon. Fusion file included.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
Filament roller to fit the new YOOPAI Pro filament storage boxes found on Amazon. I really like these new boxes over the previous "cereal box" design that have become du jour for filament storage of late. These are smaller and stack much better than the cereal boxes I've used previously.
This filament roller is designed to fit in the lid with the box placed upside down over it. It is designed for rolls up to 64mm wide.
Recommended settings:
Designed for PETG tolerances. I wouldn't recommend PLA as it will deform over time while supporting weight.
The Roller Body would likely be fine in PLA, but not the other pieces over time.
Designed to use standard 608 bearings like these ones. The bearings fit snugly into their mount locations on my prints of the Roller Body in PETG.
I've rerolled the separate Roller and Axle pieces into a single combo unit. Printed upright successfully for me using slim tree supports.
Print the Axles at 98%, 97%, or 96% and test fit through the roller before committing to printing out a bunch of them.This won't affect the length enough to be any issue, so test until you find the fit that'll work for you. Plus, they print fast. :)The Axles at closer to stock size will require smoothing down the "elephant foot" on the bottom face as well as shaving down any corner inconsistencies at the hexagonal ends to fit through the roller.The Axles were designed to be a friction fit, but while holding the weight of a spool, they don't need really to be, so prioritize getting them where you can insert through the roller without trouble.
To do:
I don't have a desiccant storage box yet. For the moment, I've just been using packets of desiccant, or as seen in a photo above, just pouring desiccant within the cutouts of the Roller Body base.
Edited 11/13/26 - Re-rolled the separate roller and axle pieces into a combo unit. Cleaned up text and recommendations. Included the Fusion file. Changed license.
